Filter
Top Products
33
ADVANCED OPERATIONS
ADVANCED
OPERATION
Virtual CINEMA DSP allows you to enjoy DSP sound
field programs without surround speakers. It creates
virtual speakers to reproduce the natural sound field.
If SURR L/R SP in SPEAKER SET is set to “NONE”,
Virtual CINEMA DSP activates automatically whenever
you select a CINEMA DSP sound field program.
Virtual CINEMA DSP will not activate, even when Surround L/R
is set to “None” (see page 38), in the following cases:
– When the 5ch Stereo, 2ch Stereo, Direct Stereo, or
SUR. STANDARD program is selected.
– When the sound effect is turned off.
– When headphones are connected.
This unit comes with a variety of input jacks. Do the
following to select the type of input signals you want to
use.
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn on
this unit (see page 42 for details about the input mode).
You cannot change the input mode when INPUT MODE of SET
MENU is set to “FIX”. In this case, change the setting to
“AUTO” or “LAST” (see page 42).
1 Select the input source.
If no operation is performed within 5 seconds of pressing INPUT
or VOLUME/SELECT is pressed on the front panel, the function
of VOLUME/SELECT switches back to volume level adjustment.
If this happens, “VOLUME” appears in the front panel display for
a few seconds.
Virtual CINEMA DSP
Note
Selecting input modes
Note
Note
VOLUME/SELECT
INPUT
AMP
VCRDVD/CD VIDEO 1
TUNERDTV/CBL VIDEO 2
Front panel
or
(within 5 seconds)
Remote control