Filter
Top Products
YMF715E
May 21, 1997
-38-
Sound Blaster compatibility Internal State Scan out/in (R/W):
Index D7 D6 D5 D4 D3 D2 D1 D0
10h SBPDA - - - SS SM SE SBPDR
SBPDA... Sound Blaster Power Down Acknowledgment: “1” in SBPDA acknowledges
that OPL3-SA3 is ready for scanning internal state data in/out or for power
down operation. This flag is read-only.
SS... Scan Select : Set “1” in this bit when reading or writing internal state.
Set “0” for normal operation.
SM... Scan Mode : Setting “1” in this bit means the internal state’s are read(out).
Set “0” for write(in).
SE... Scan Enable : “1” to “0” transition in this bit clocks the shifting internal state
scan data out 1-bit at a time.
SBPDR... Sound Blaster Power Down Request : “1” in this bit inhibits further DMA
requests and have the internal state begin shutdown procedure. “1” in
SBPDA signals the shutdown procedure completion.
default : 00h
Sound Blaster compatibility Internal State Scan Data (R/W):
Index D7 D6 D5 D4 D3 D2 D1 D0
11h SCAN DATA
SCAN DATA... Data port for internal state scan data in/out.
default : 00h
Notice)
The Sound Blaster compatibility internal state scan out/in sequence are shown in the
following Fig.9-1.