Filter
Top Products
YMF715E
May 21, 1997
-24-
8-4. Suspend/Resume Mode
There is no “read only” or “hidden state” registers in OPL3-SA3. This means you can always read
and save these values before power off and can set those values back in registers after reset or power
on to achieve the suspend/resume capability.
Correspondence to APM
Note : Analog Power OFF Feature
OPL3-SA3 has the special feature that the Analog power supplies can be removed from OPL3-SA3. This
feature is independent of digital portion.
APM OPL3-SA3 WIN(Driver) BIOS
ON ON
APM Enabled Partial Power Down
APM Standby Power Save(Down)
APM Suspend OFF
OFF OFF