![](http://pdfasset.owneriq.net/6/71/671f4068-e683-4479-a001-4843326a1662/671f4068-e683-4479-a001-4843326a1662-bg13.png)
15 En
CONNECTIONS
PREPARATION
5 Hook the speaker terminal wrench onto the
WRENCH HOLDER on the rear panel of this
unit when not in use.
■ Connecting the banana plug
The banana plug is a single-pole electrical connector
widely used to terminate speaker cables.
1 Tighten the knob using the supplied speaker
terminal wrench.
2 Insert the banana plug connector into the
end of the corresponding terminal.
Banana plug
Red: positive (+)
Black: negative (–)
Speaker terminal wrench
01EN_00_HTR-6090_U.book Page 15 Tuesday, June 27, 2006 6:40 PM