Filter
Top Products
CONTROLS AND FUNCTIONS
4
1 STANDBY/ON
Turns on this unit or sets it to the standby mode. When you
turn on this unit, you will hear a click and there will be a 4
to 5-second delay before this unit can reproduce sound.
In the standby mode, this unit consumes a small amount of power
in order to receive infrared-signals from the remote control.
2 Remote control sensor
Receives signals from the remote control.
3 PRESET/TUNING
Switches the function of PRESET/TUNING l / h
between selecting preset station numbers and selecting the
tuning frequency.
4 FM/AM
Switches the reception band between FM and AM.
5 A/B/C/D/E
Selects one of the 5 preset station groups (A to E) when
this unit is in the tuner mode.
6 PRESET/TUNING l / h
Selects one of the preset station numbers (1 to 8) or the
tuning frequency when this unit is in the tuner mode.
7 Front panel display
Shows information about the operational status of this unit.
8 MEMORY
Stores a preset station in the memory. Hold down this
button for more than 3 seconds to start automatic preset
tuning.
9 TUNING MODE
Switches between automatic tuning (the AUTO indicator
is turned on) and manual tuning (the AUTO indicator is
turned off).
0 VOLUME
Controls the output level of all audio channels.
This does not affect the OUT level.
CONTROLS AND FUNCTIONS
Front panel
STANDBY
/ON
PHONES
STEREO
EDIT
PRESET/TUNING
FM/AM
A/B/C/D/E
PRESET/TUNING MEMORY
MAN'L/AUTO FM
TUNING MODE
AUTO/ MAN' L
SET MENUNEXT
EFFECT
TONE CONTROL
BASS/TREBLE
PROGRAM INPUT
INPUT MODE
VOLUME
lh
lhl
h
ABCDE
1234567890
Note
Note