Yamaha HTR-5920 Stereo Receiver User Manual


 
26
FM/AM TUNING
3 Press and hold MEMORY on the front panel
for more than 3 seconds.
The preset station number and the MEMORY and
AUTO indicators flash. After approximately 5
seconds, automatic presetting starts from the current
frequency and proceeds toward the higher
frequencies.
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
number.
If the number of received stations does not reach 40 (E8),
automatic preset tuning automatically stops after searching for
all the available stations.
Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it manually
and store it as described in “Manual preset tuning” on page 27.
Customized automatic preset tuning
You can select the preset number from which this unit will
store FM stations and/or begin tuning toward lower
frequencies.
After pressing MEMORY in step 3:
1
Press
A/B/C/D/E
, and then
PRESET/TUNING
l
/
h
to
select the preset number under which the first station will
be stored. Aut omati c pr ese t tu ni ng st ops whe n sta ti ons
have all bee n st or ed u p t o
E8
.
2 Press PRESET/TUNING so that the PRESET indicator
disappears from the front panel display and then press
PRESET/TUNING l to begin tuning toward the
lower frequencies.
Notes
MAN'L/AUTO FM
MEMORY
FM
TUNED
AUTO
MHz
MEMORY
FlashesFlashes
Flashes