Filter
Top Products
CONTROLS AND FUNCTIONS
6
1 Infrared signal transmitter
Outputs infrared control signals.
2 STANDBY
Sets this unit in the standby mode.
3 Input selector buttons
Select the input source.
4 Preset station number selector buttons
(P1 to P8)
Select the preset station number (1 to 8) directly when this
unit is in the tuner mode.
5 A/B/C/D/E
Selects a preset station group (A to E) when this unit is in
the tuner mode.
6 VOLUME +/–
Increases or decreases the volume level.
7 SET MENU
Activates the SET MENU function.
8 Cursor buttons / / / , ENTER
Select and adjust the SET MENU items.
9 LEVEL
Selects the speaker channel to be adjusted and sets the
output level.
0 Surround mode selector buttons
Select the surround modes.
A POWER
Turns on this unit.
B SLEEP
Sets the sleep timer.
C PRESET u / d
Select a preset station number (1 to 8) when this unit is in
the tuner mode.
D MUTE
Mutes the audio output. Press MUTE again to restore the
audio output to the previous volume level.
E TEST
Outputs the test tone to adjust the speaker levels.
F STEREO
Switches between normal stereo and DSP effect
reproduction. When you select “STEREO”, this unit
mixes down all Dolby Digital and DTS signals (except the
LFE channel) as well as those 2-channel signals without
effect sounds to the front left and right speakers.
G NIGHT
Turns on or off the night listening mode. The night
listening mode is available only for Dolby Digital sources.
Remote control
STANDBY
POWER
CD
DVD
MD/CD-R
DTV/CBL
TUNER
TUNER
P1 P2 P3 P4
P5 P6 P7 P8
VCR
SLEEP
V-AUX
A/B/C/D/E PRESET
MUTE
TESTLEVEL
HALL
5 STEREO
JAZZ
NIGHT
ROCK PL
STEREO
SET MENU
ENTER
VOLUME
1
2
3
4
5
6
7
8
9
0
G
F
E
D
C
B
A