Filter
Top Products
27
FM/AM TUNING
BASIC
OPERATION
English
You can also store up to 40 stations (8 stations x 5 groups)
manually.
1 Tune into a station.
See page 24 for tuning instructions.
When tuned into a station, the front panel display
shows the frequency of the station received.
2 Press MEMORY on the front panel.
The MEMORY indicator flashes for approximately 5
seconds.
3 Press A/B/C/D/E on the front panel
repeatedly to select a preset station group (A
to E) while the MEMORY indicator is flashing.
4 Press PRESET/TUNING l / h on the front
panel to select a preset station number (1 to
8) while the MEMORY indicator is flashing.
Press h to select a higher preset station number.
Press l to select a lower preset station number.
5 Press MEMORY on the front panel while the
MEMORY indicator is flashing.
The station band and frequency appear in the front
panel display with the preset group and number you
have selected.
6 Repeat steps 1 through 5 to store other
stations.
• Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
• The reception mode (stereo or monaural) is stored along with
the station frequency.
Manual preset tuning
STANDBY
/ON
PHONES
STEREO
EDIT
PRESET/TUNING
FM/AM
A/B/C/D/E
PRESET/TUNING MEMORY
MAN'L/AUTO FM
TUNING MODE
AUTO/MA N'L
SET MENUNEXT
EFFECT
TONE CONTROL
BASS/TREBLE
PROGRAM INPUT
INPUT MODE
VOLUME
lh
lhl
h
2,543
AM
TUNED
kHz
MAN'L/AUTO FM
MEMORY