Filter
Top Products
RECORDING
30
Recording adjustments and other operations are performed from the recording components. Refer to the operating
instructions for those components.
1 Turn on all the connected components.
2 Press INPUT l / h on the front panel (or one
of the input selector buttons on the remote
control) to select the source component you
want to record from.
3 Start playback on the selected source
component or select a broadcast station.
4 Start recording on the recording component.
y
Do a test recording before you start an actual recording.
• When this unit is set to the standby mode, you cannot record
between other components connected to this unit.
• The setting of frequency response levels (page 21), volume,
speaker levels (page 32) and the surround mode do not affect
recorded material.
• A given input source is not output on the same OUT channel.
(For example, the signal input at VCR IN is not output at VCR
OUT.)
• Check the copyright laws in your country to record from CDs,
radio, etc. Recording of copyrighted material may infringe
copyright laws.
RECORDING
STANDBY
/ON
PHONES
STEREO
EDIT
PRESET/TUNING
FM/AM
A/B/C/D/E
PRESET/TUNING MEMORY
MAN'L/AUTO FM
TUNING MODE
AUTO/MAN'L
SET MENUNEXT
EFFECT
TONE CONTROL
BASS/TREBLE
PROGRAM INPUT
INPUT MODE
VOLUME
lh
lhl
h
2
STANDBY
POWER
CD
DVD
MD/CD-R
DTV/CBL
TUNER
TUNER
P1 P2 P3 P4
P5 P6 P7 P8
VCR
SLEEP
V-AU X
A/B/C/D/E PRESET
2
INPUT
or
Front panel Remote control
CD
DVD
MD/CD-R
DTV/CBL
TUNER
VCR V-AUX
Notes
If you play back a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.