Open as PDF
Cable and satellite tuner operations
Press AUX for the cable and satellite tuner operations.
Functions for cable and satellite tuners
Turns on the cable and satellite tuner, or sets them to the
Confirms a selection.
Numeric keypad (0-9)
Cable: enters a number of a cable channel.
Satellite tuner: enters a number of a preset radio station.
TV CH (+/–)
Switches the cable or satellite tuner channel.
■ Dimming the display screen
In any active mode, press DIMMER on the remote control
to select the desired brightness:
DIM 1: 70% brightness
DIM 2: 40% brightness
DIM OFF: normal brightness
■ Setting the sleep timer
The sleep timer switches the receiver to Eco Power
standby mode automatically at the preset time.
1 Press SLEEP on the remote control until “SLEEP XX”
appears in the display panel (
XX: 15, 30, 45, 60 or
2 To select the next sleep timer value, continue pressing
SLEEP while in sleep timer mode until the desired
turn-off time is displayed.
→ “SLEEP” appears in the display panel, except when
“SLEEP OFF” is selected.
→ Before the receiver switches to Eco Power standby
mode, a countdown of 10 seconds is displayed.
“SLEEP 10” → “SLEEP 9”.... →
“SLEEP 2” → “SLEEP 1”
To cancel the sleep timer
Press SLEEP until “
SLEEP OFF” appears.
■ Recording on an external AV
1 Connect the external recording component to LINE
OUT (see “Connecting external AV components” on
2 Select the source to record from this DVD receiver
(DVD/CD, TUNER, TV or AUX) and start playback
3 Start recording on the external recording device.
Refer to the owner’s manual of the connected
component for details.
TV VOL TV CH
SUBTITLE AUDIO ANGLE ZOOM
TV AUX TUNER DVD/CD
REPEAT A - B
TV CH (+/–)