Open as PDF
For proper surround sound, make sure the speakers and
subwoofer are connected to this receiver (see “Connecting the
subwoofer” on page 17).
■ Selecting surround sound
– Press SURR on the remote control to select:
MULTI-CHANNEL or STEREO.
– The availability of the various surround sound modes
depends on the number of speakers used and the sound
available on the disc.
The center and surround speakers operate only in
multi-channel surround mode.
Stereo broadcasts or recordings produce some
surround channel effects when played in a surround
mode. However, mono (single channel sound) sources
do not produce any sound from the surround speakers.
The surround sound mode cannot be selected if the system
setup menu is selected.
■ Selecting digital sound effects
You can select preset digital sound effects that match the
content of your disc, or that optimize the sound of the
musical style you are playing.
Press EFFECT to select from the available sound
When playing movie discs or while in TV mode, you
CONCERT, DRAMA, ACTION or SCI-FI.
When playing music discs or while in TUNER or AUX
mode, you can select:
ROCK, DIGITAL, CLASSIC or JAZZ.
– Digital sound effects and the treble/bass features
cannot be activated at the same time.
– For flat sound output, select CONCERT or
■ Adjusting the treble/bass level
The TREBLE (high tone) and BASS (low tone) features
enable you to define the sound-processor settings.
1 Press TRE or BASS on the remote control.
2 Within five seconds, press VOL (+/–) to adjust the
treble or bass level (MIN, –2, –1, 0, +1, +2 or MAX).
→ If the volume control is not used within five
seconds, it will resume its normal volume control
TV VOL TV CH
SUBTITLE AUDIO ANGLE ZOOM
TV AUX TUNER DVD/CD