Filter
Top Products
41 En
PLAYBACK
BASIC
OPERATION
3 Start playback on the selected source
component or select a broadcast station.
• Refer to the operating instructions for the source
component.
• See page 56 for details about tuning instructions.
• See page 67 for details about XM Satellite Radio
tuning instructions.
4 Rotate VOLUME on the front panel (or press
VOLUME +/– on the remote control) to adjust
the volume to the desired output level.
y
See page 53 to adjust the level of each speaker.
5 Rotate the PROGRAM selector on the front
panel (or press one of the sound field
program selector buttons on the remote
control repeatedly) to select the desired
sound field program.
The name of the selected sound field program appears
in the front panel display and in the short message
display. See page 47 for details about sound field
programs.
Sound field programs and the Compressed Music Enhancer
mode cannot be selected when the component connected to
the MULTI CH INPUT jacks is selected as the input source
(see page 43) and Audio input jack select is set to
“ANALOG” (see page 42).
y
• Choose a sound field program based on your listening
preference, not merely on the name of the program.
• When you select an input source, this unit automatically
selects the last sound field program used with the
corresponding input source.
■ Guide to contents
VOLUME
+
–
VOLUME
or
Remote controlFront panel
PROGRAM
4
3
2
5
1
STEREO
CLASSICAL
LIVE/CLUB
ENTERTAIN
MOVIE
Front panel
or
Remote control
Sci-Fi
MOVIE
Currently selected sound field program
Currently selected sound field program category
Note
When you want to...
See
page
Enjoy pure hi-fi stereo sound 52
Adjust the tonal quality of the front speakers 52
Enjoy the compressed music sources in enhanced
sound
54
Edit parameters of sound field programs 88
Enjoy the sources which have wide dynamic range at
night
55
Use headphones 43
Enjoy multi-channel sources in 2-channel stereo 53
Select a decoder to play back sources with 84
Set this unit to the standby mode automatically 45