Yamaha 376 Stereo Receiver User Manual


 
USING MULTI-ZONE CONFIGURATION
130 En
This unit allows you to configure a multi-room audio/video system. The multi-zone configuration feature enables you to
set this unit to reproduce separate input sources in the main room, second room (Zone 2) and third room (Zone 3). You
can control this unit from the second or third room using the supplied remote control.
You need the following additional equipment to use the multi-room functions of this unit:
An infrared signal receiver in the second and/or third room.
An infrared emitter in the main room. This emitter transmits the infrared signals from the remote control in the second
and/or third room to the main room (to a CD player or DVD player, for example).
An amplifier and speakers for the second and/or third room.
A video monitor for the second room
y
You do not need an extra amplifier and speakers for the second and/or third room if you want to use the internal amplifiers of this unit.
Since there are many possible ways to connect and use this unit in a multi-room configuration, we recommend that you consult with
your nearest authorized YAMAHA dealer or service center for the Zone 2 and Zone 3 connections that best meet your requirements.
Using external amplifiers
To use an external amplifier in Zone 2 or Zone 3, connect the external amplifier to ZONE OUT terminals and select
“EXT” in “Zone2 Amplifier” or “Zone3 Amplifier” (see page 113).
Adjust the Zone 2/Zone 3 volume by using the amplifier in the second/third room when “Zone2 Volume” or “Zone3 Volume” are set to
“Fixed” (see page 113).
To avoid unexpected noise, DO NOT use the Zone 2/Zone 3 feature with CDs encoded in DTS.
USING MULTI-ZONE CONFIGURATION
Only analog signals are sent to the second and third rooms. Any source you want to listen to in the second or third
room must be connected using the analog (AUDIO L/R) input jacks on this unit.
Connecting the Zone 2 and Zone 3 components
Notes
OUTOUT
IN
REMOTE
IN
REMOTE
OUT
IN
REMOTE
REMOTE
This unit
YAMAHA
component
YAMAHA
component
Infrared signal
receiver
REMOTE OUT
VIDEO IN
AUDIO IN
MONITOR OUT
SP OUT
REMOTE IN
ZONE 2 AUDIO OUT
ZONE 3 AUDIO OUT
REMOTE IN
MAIN
ZONE 2
ZONE 3
ZONE 2 VIDEO OUT
Infrared emitter
DVD player
(or other component)
Amplifier
Remote control
Infrared signal
receiver
Amplifier
Remote control
Infrared signal
receiver
Second room
(Zone 2)
Third room
(Zone 3)
Main room
(Main zone)
SYSTEM
This unit