Wolf DCX-1000I Home Theater System User Manual


 
Wolf Cinema Owner's Manual
3-37
Broadcast Key
Enter a checkmark if you want keypad commands sent to one projector to be relayed to all
projectors in a serial network. Note that the key will temporarily “override” the effect of a broadcast
settingandallowyoutocontrolaspecicprojectorwhennecessary.Disablethesettingforallbut
one (any) projector in a network.
Backlight
Toggle the built-in keypad lighting on/off.
Front IR / Back IR
As needed for your application, set to “any” so that the front and/or rear IR sensor locations on
the projector respond to the IR keypad. Set to “off” to disable.
To disable both IR sensors, you cannot use the IR remote keypad to select the second OFF
setting. This safeguard prevents accidentally disabling an IR keypad while you are using it.
Instead, use either the built-in keypad or a wired remote (optional) to set the remaining active
sensor to OFF. The projector will no longer respond to an IR remote keypad.
NOTE: Protocols B – G are used for rental staging applications.
Section3►Operation
In the Display Setup menu, select
the Geometry and Color submenu
when you need to modify overall
color performance and/or image
geometry for all sources.
Test Pattern
Choose the desired internal test
pattern or select OFF to turn off a
test pattern. Alternatively, use the
Test
key for cycling through test
patterns.
Keystone (Not recommended to use Keystone on Wolf Warp pictures)
Use to correct a keystoned image shape in which both sides of your image are inclined toward
the top or bottom edge. Keystone is typically caused by tilting the projector in relation to the
screen, so that the lens surface and screen are no longer parallel to each other.
NOTE: Wolf Cinema recommends that the keystone feature not be used unless absolutely
necessary, as it may cause some artifacting in the image.
System Conguration >
— GEOMETRY & COLOR —
Figure 3.16. Keystone Adjustment
1.
2.
3.
4.
5.
6.
7.
8.
9.
Test Pattern
Keystone
White Field Uniformity
Edge Blending
Color Adjustments by X,Y
Color Temp Adjust
Black Edge Blending
Default Color Adjustment
Lens VariScope (LVS)
Geometry and Color
Grid
50.0
Keystone and Warping if Wolf Cinema warping module is present
(standard in Wolf Cinema models, optional in all others).