Velodyne Acoustics Digital Drive Speaker User Manual


 
20
.
www.velodyne.com
Digital Drive User’s Manual
7
. Use the DD remote control to MUTE the subwoofer.
8
. Raise the volume on your receiver/processor until the DD test sweep (a tone that sweeps
from 20Hz up to 200Hz) can be heard from your system’s speakers. Continue to raise the
volume until the “SYSTEM RESPONSE” graph on your TV shows the response of your full
range speakers (the right hand portion of the graph) at approximately 76 dB (or a
comfortable listening level). This is shown below: