Filter
Top Products
15
.
www.velodyne.com
Digital Drive User’s Manual
Figure 5: System Settings Screen
Fr
om this scr
een the crossover, subsonic filter, phase, polarity, theater/music, volume, and
other settings can be set, as well as specifics for each preset, if desired.
Your DD unit comes with 6 presets, four of which are preprogrammed at the factory. The
Setup setting is used to initially set the cr
ossovers, slopes, phase, polarity
, and volume for all
presets. Then, each preset can be individually adjusted if desired. The presets are as follows
(they ar
e also labeled on the remote):
1. Action/Adventure
2. Movies
3. Pop/Rock
4. Jazz/Classical
5. Custom (off from the factory, or flat)
6. EQ Defeat
All six presets contain the following fields:
• Low Pass Crossover Frequency and Slope – Adjust the upper limit of your subwoofer’s
frequency r
esponse. Select a cr
ossover setting, in incr
ements of 1, between 15Hz and
199Hz and slope at 6, 12, 18, 24, 30, 36, 42 and 48 dB/octave.
• Subsonic Filter Frequency and Slope – Set your subwoofer’
s subsonic filter (low
frequency limit), in increments of 1, between 15Hz – 35Hz and slope at 6, 12, 18, 24,
30, 36, 42 and 48 dB/octave.