Transcend Information 820 Headphones User Manual


 
39
REC Input Device
Select the MIC (Built-In Microphone), Ext MIC (External Microphone) or LINE-IN (e.g. CD Player) to
be the Audio Recording method used by the T.sonic
820.
1. In the SETTINGS Menu, press the “Volume Up”
/ “Volume Down” , or “Next-Fast
Forward”
/ “Back-Fast Rewind” buttons to select the REC Input Device icon, then press
the “PLAY/PAUSE” button to enter the REC INPUT DEVICE Mode.
2. Press the “Volume Up” button , or “Volume Down” button to select the MIC (Microphone),
Ext MIC (External Microphone) or LINE-IN (e.g. CD Player) as the audio recording method and
press the “PLAY/PAUSE” button
to confirm the selection and return to the SETTINGS Menu.
VAD (Voice Activation Detection)
VAD allows the T.sonic
820 to make gapless audio recordings. This means the player will only begin
recording when it detects the subject is speaking, if the person(s) pauses, or stops speaking the T.sonic
820 will stop recording until the person(s) starts speaking again. This allows you to make complete and
very easy to listen to recordings.
1. In the SETTINGS Menu, press the “Volume Up”
/ “Volume Down” , or “Next-Fast
Forward”
/ “Back-Fast Rewind” buttons to select the VAD icon, then press the
“PLAY/PAUSE” button
to enter the VAD Mode.
2. Press the “Volume Up” button , or “Volume Down” button to select the ENABLE, or
DISABLE option and press the “PLAY/PAUSE” button
to confirm the selection and return to the
REC Settings Menu.
SETTINGS SETTINGS