Filter
Top Products
19
Record using the Line-In connection
1. In the REC INPUT DEVICE Mode select Line-In as the recording device.
2. Plug the Line-In cable into the T.sonic
™
820’s Line-In port and connect the other end of the Line-In
cable to a compatible source device e.g. CD Player.
3. Press and Hold the “RECORD” button
for more than 2 seconds to begin recording the source
device using the T.sonic
™
820’s Line-In connection.
4. A Recording file is generated and will appear on the screen; this file is saved in the RECORD Mode in
the [/LINEIN.DIR/] folder.
5. Files Recorded using the Line-In are named in the order [Month/DayL001.WAV], then
[Month/DayL002.WAV] and so forth.
6. Pressing the “PLAY/PAUSE” button
during a recording will Pause the recording, pressing the
“PLAY/PAUSE” button again will resume the recording.
7. Press the “RECORD” button
for more than 2 seconds during a recording to stop the recording
and the screen will return to the RECORD Mode.
8. Recorded files can be accessed in the RECORD Mode, or by using the File Navigator.
Sample rate Channels 2GB 4GB
Low (8KHz) 2 (mono) 64 hrs 128 hrs
Med (16KHz) 2 (mono) 32 hrs 64 hrs
Record Sound
High (32KHz) 2 (mono) 16 hrs 32 hrs
If not enough memory space is available, or the battery power is too low, the T.sonic
™
820 cannot
support the maximum recording capacity as outlined in the above table.
RECORD Functions