Transcend Information 820 Headphones User Manual


 
9
File Navigation
Press the “Navigation” button in the MUSIC, RECORD, VIDEO, PHOTO, or E-book Mode to
enter the File Navigator for that mode.
Make an Audio Recording
The Default Recording Mode for the T.sonic
820 is its Built-in Microphone.
Press and Hold the “RECORD” button for more than 2 seconds in any mode except the
RADIO Mode will activate the T.sonic
820’s built-in microphone and begin recording.
Press and Hold the “RECORD” button for more than 2 seconds during a recording to stop the
recording.
Recorded audio files are saved in the RECORD Mode.
Repeat/Shuffle Functions
Normal, Repeat One, Repeat All, or Shuffle a track and Normal/Repeat/Shuffle tracks in a Folder,
Please see the “REPEAT Mode” in the Settings section for detailed instructions.
A-B Repeat: Repeat a Section of a Track
In the MUSIC, or RECORD Modes’, press the “RECORD” button once to mark the beginning
of the track you wish to repeat.
Press the “RECORD” button again to mark the end of the section of the track you wish to
repeat.
The marked section of the track is played as a continuous loop when playing an MP3, WMA,
WMA-DRM10, or WAV track.
Press the “RECORD” button for a third time to stop the track repeating.
Lock
When the “LOCK” switch is set to the “ON” position, all of the T.sonic
820’s buttons are
disabled.
Reset the T.sonic
820
You can Reset the unit by pressing the “Reset” button for 3 to 5 seconds.
Player Controls