Filter
Top Products
27
Recording
Playback
Editing
Library
Function setup
Others
Introduction
SETUP
If you select this service and press ENTER, options to change settings are listed.
To execute the setup again
1) Press / to select “Change system settings” then press ENTER.
Your current settings are displayed.
2) Press
/ to select your answer then press ENTER.
3) Follow the on-screen guidance.
To arrange the position the channel appears in LISTINGS
To change the tuning channel number
To switch channels on/off in LISTINGS
1) Press / to select “Change channel display” then press ENTER.
“Grid Options” appears.
2) Press
/ to select a channel then press Menu.
3) Press
/ to select then press ENTER.
4) When complete, press
/ to select “done” then press ENTER.
To change Info Box size
1) Press / to select “Change default options” then press ENTER.
2) Press
/ to select “General defaults” then press Menu.
“General Defaults” appears.
Grid Options
cancel
done
go back to Setup
Air
service
on
tune channel
channel
position
1
8
channel
service
tune channel
position
Press / to select “on” or “off”.
on: the channel is always displayed.
off: the channel is never displayed.
auto-hide: the channel hides automatically.
Press
/ to select the signal type of the channel.
Press the number button to enter a channel.
Press the number button to enter a desired position for the channel in
LISTINGS.
e.g.
3) Press / to select then press ENTER.
4) When complete, press
/ to select “done” then press ENTER.
i box size
box style
auto guide
Press
/ to select the initial size of the Info Box.
Press
/ to select the size location when Info is pressed.
Press
/ to select whether the recorder enters TV Guide On
Screen system when powered on.
e.g.
General Defaults
cancel
done
go to Service Bar
last used
box size
all
box style
on
auto guide