Filter
Top Products
170
Remote control
The remote control does not work.
• The batteries in the remote control are exhausted.
→Replace all the batteries in the remote control
(
page 18, “INSTALLATION GUIDE”).
• The light emitter of the remote control is not pointed
at the receptor of this recorder.
→Point the emitter of the remote control at the
receptor of this recorder.
• The receptor of this recorder is located too far away
from the remote control.
→Operate the remote control within 7 meters (23 ft)
from the receptor of this recorder.
• There are obstacles between the remote control and
this recorder.
→ Remove any obstacles.
• The receptor is disturbed by sunlight or fluorescent
light.
→ Change the place of this recorder or shield the
light.
• The remote mode is not appropriate.
→Adjust the remote mode of the remote control and
this recorder (
page 46, “INSTALLATION
GUIDE”).
• The setting of the TV/DVD switch is not correct.
→Set the TV/DVD switch to the equipment to
operate.
Clock
The clock blinks.
→Set the clock ( page 165).
Before calling service personnel (Continued)
Others