Toshiba RD-XS34SU Speaker System User Manual


 
162
Aspect ratio(Video mode)
DVD-RW
DVD-R
To set the aspect ratio when recording onto a DVD-R/RW
disc.
4:3:
Fixes the aspect ratio at 4:3.
16:9:
Fixes the aspect ratio at 16:9.
Note
When the bit rate on User record quality is set to
1.0(Mbps) and 1.4(Mbps), pictures are recorded in 4:3
aspect ratio even if 16:9 is selected.
DVD compatible mode
DVD-RDVD-RW
HDD
DVD-RAM
To set whether or not recording is to be performed in the
format for which recording is allowed by the DVD-Video
standard (video, audio and other data) during recording.
This selection is important for contents when recorded on
this recorder, if they will be copied to DVD-R/RW.
Off:
For recording of contents which will not be copied to a
DVD-R/RW disc.
Both the main and SAP sounds are recorded.
When recording directly on a DVD-R/RW disc, this is
ineffective. The recorder will automatically regard this
as Main, and record sound of the main channel only
in stereo. Select Main or SAP for DVD-R/RW
recording.
Main:
Records sound of the main channel only in stereo.
SAP:
Records sound of the SAP channel only in stereo.
Notes
When you select the manual rate of the picture quality
between 3.0 and 3.8 and set this mode to Main or SAP,
the picture quality may become lower than when you set
this mode to Off.
You can change the setting from Quick Menu.
It is no use to make this selection when dubbing. Select
when recording.
DVD-Video:CHP create
DVD-RW
DVD-R
To set whether chapters are to be automatically created
at a selected interval during DVD-R/RW recording.
Off:
Chapters are not set.
5 min. : 10 min. : 15 min. : 20 min.
To set the interval at which chapters are automatically
created to 5, 10, 15 or 20 minutes.
Note
The number of chapters has the upper limit, which varies
depending on the disc condition. If the number reaches it,
no more chapters are created.
Rec DNR
DVD-RDVD-RW
HDD
DVD-RAM
Selects the level of 3D digital noise reduction that can
reduce picture noise depending on the scene.
Off:
Deactivates the 3D digital noise reduction.
On:
Sets the normal level.
Expanded:
Increases digital noise reduction.
Notes
When you set Rec DNR to On or Expanded and set
3D Y/C Separation to On, the priority changes
depending on the input selection if you select the S-video
input. Rec DNR has priority, when you select the built-in
tuner or composite input, 3D Y/C Separation has priority.
If you want to avoid an afterimage, set this setting to Off.
3D Y/C separation
DVD-RDVD-RW
HDD
DVD-RAM
The 3D digital comb filter executes Y/C (Brightness/
Color) separation to reduce the color irregularity or cross
color interference.
Off:
Deactivates this function.
In an area where the broadcast reception is poor,
select this mode.
On:
Activates this function.
In normal conditions, select this.
Note
Refer to the Notes in the above Rec DNR.
Customizing the function settings (Continued)
Function Setup