Filter
Top Products
47
Playback
Recording
Editing
Function setup
Others
Introduction
Library
Recording
Setting a recording
To record TV programs and end them automatically, follow the procedures of this chapter.
Before setting recording, see “Before recording” (
page 32).
1
Press TV Guide.
TV Guide On Screen LISTINGS appears.
2
Press / to select a TV program to record.
For searching a TV program, see page 24.
3
Press REC repeatedly to select the recording
frequency.
Each time you press REC button, the icon changes.
For the icons, see
page 49.
Preparation
• When you record on a DVD-RAM/R/RW disc, load it into the recorder.
– Load a disc which has sufficient remaining space to record the program.
– Make sure the loaded disc is not write-protected.
• Make sure that the disc has enough space to record.
• Set “DVD Compatible mode” beforehand. (
page 39)
• To record satellite TV programs, set a recording manually (
page 50)
If you do not need to change recording options (recording mode or time range), see “With recording frequency
selection only” below.
If you want to change these recording options, follow the procedure of “Changing the recording options” procedure
(
page 48) or “Set recording by specifying details manually” ( page 50).
With recording frequency selection only
Note
• Recording will be executed on the defaut settings ( page 28).
REC
ENTER
HDD
DVD-RAM
DVD-R
DVD-RW
Start
TV Guide