Filter
Top Products
Basic Operating Procedure
3 Load the disc(s) 1
on the disc l
tray(s). J
DISC SKIP
PLAY
1 Press POWER to switch on the power.
2 Press OPENICLOSE to open the loading
drawer.
(Also available from the remote control.)
3
Load the disc(s) on the disc tray(s).
Do not load 3" (8 cm) and 5" (12 cm) discs on the same disc
tray.
The number (1-5) on the disc tray indicates the disc number.
Label
must face
upward. I Carousel
After loading discs on the two disc trays at the front position,
press DISC SKIP to move the carousel. A different two disc
trays will be at the front position each time DISC SKIP is press-
ed.
Notes:
Do not touch the carousel nor the loading drawer while it is
moving.
Do not turn the carousel forcibly by hand because it may
fail to operate normally.
4
5
Press OPENICLOSE again to close the
loading drawer.
(Also available from the remote control.)
You can skip this step by pressing PLAY.
The loading drawer will be closed automatically then play will
start.
Do not attempt to close the drawer by hand. Be sure to press
OPEN/CLOSE.
Press PLAY.
(Also available from the remote control.)
CAUTION:
Do not move this changer with a compact disc inside the unit.
If a disc comes off the disc tray, it might be scratched or the
changer might become incapable of playing. Refer to page 35
before moving the unit.
9