Filter
Top Products
Program Play ,oon,,°..°,
2 %
3
'\
1 2 3 4 5
(DO(_ OO
r5 i
Repeat steps
3 and 4 as
desired.
From the remote control
Before operation, follow the steps 1 -4 of "Basic
Operating Procedure" on page 9.
In the stop mode, press PROGRAM MODE to
Illuminate the program play indicator.
Skip to step 4 if the disc number display shows the desired
disc number.
1 2 3 4
P_ . . °
Disc number display
I
5 i 17 m }
I L../_= .=.u
JDISC
2 Press DISC.
5
Repeat steps 2, 3 and 4 until you have com.
pleted the desired entry.
If you enter non-existing disc(s) or track(s) soon after the
loading drawer is closed or when it is open, the corresponding
indicator illuminates and the entry is included in the count. In
the play mode, the changer will cancel the non-existing entry
and play the subsequent programmed disc or track.
If you attempt a 33rd selection, the -F (full) indication will
be displayed.
3
4
Press the numeric button (1-5) to specify the
disc number.
Skip to step 5 if you want to enter only the disc number.
Press the numeric button(s) to specify the
track number.
For example: To select track number 20, press > 10, then 2,
and then O.
6 Press PLAY to start play.
To enter additional selections during play, repeat steps 2, 3
and 4.
Play the changer with the loading drawer closed.
While the loading drawer is open, if next programmed selection is
in one of the other discs, the changer will stop after the current
track finishes playing.
16