Filter
Top Products
CD Edit-Recording ,co.,,.u..,
i i , _sK_ 11 (/'J Prepare the / IO 14 1 l/
| "-'-_,'_k_J | cassette deck for| | / /
L___ R..) J L recording. J _ "_ J _ _) J
0
h , f
Sequential-edit-recording
The changer automatically calculates how many tracks on the
specified disc will fit on a given tape side and programs them for
you.
Before operation, follow the steps 1-4 of "Basic
Operating Procedure" on page 9.
.4
/ Press DISC SKIP to select the disc to be ,J
recorded.
Specified disc number
I
1(f)(2)(3)(4)(5) [-nn i-i'-Illt-i Iz!UU.LILI
.... o,=:/_JL/T.= .,. s_c
2
Prepare the cassette deck for recording.
1. Insert the cassette tape into the cassette holder of the
deck for the synchro edit recording. (Be sure the tape is re-
wound.)
2. Select the noise-reduction system and the reverse mode
(C-'_).
3. Check to be sure that the forward-side indicator (1_) of the
deck to be used is illuminated.
4. Press PLAY of this changer.
5. Set the cassette deck on the recording standby mode.
6. Adjust the recording level.
7. Press STOP of this changer.
(Refer to the operating instructions for the cassette deck.)
Press TAPE LENGTH to select the tape
length.
Each time you press the button, the display showing the tape
length changes as follows. Choose the length of the tape you
will use.
I-C-46_>c-80_>c-9o©
C----]
I,
I
(1) (2) (3) (4),_,' ,5),' /'_ ll-- - h I El ] J
._. ,_. o,ocIL .,,I
/
Compact disc edit indicator
The maximum allowable playing time for editing is 99 minutes.
To enter desired recording time other than 46, 60 or 90
minutes:
1 Select C---.
2 Enter the total recording time in minutes (1-99) using the
numeric buttons on the remote control.
For example:
To use 52-minute tape, press 5 then 2.
You can also specify the tape length pressing the skip button.
Press either I_1_1 or 141_1from each step C-46, C-60, C-90 or
C---,
For example:
To use 52-minutes tape, select C-46 and press and hold I_1_1
until the display shows __.
32