Technics SL-PD947 CD Player User Manual


 
Special Features ,°o°,,n..°,
]
_) Pitch control
I "_*i..... I I ' I ' I ' I ' I ' I
L__I
r--i
©
S
Pitch control function
The playback pitch can be changed as desired within a range of
+12.5%. (The tempo and the pitch of the sound will change
simultaneously.)
1 Press OFFION
The pitch control indicator will illuminate.
t_
L Turn the knob in the "+" or "-" direction.
The pitch will change while the knob is being held, and the
changed values will show on the display.
+: Pitch increases
-: Pitch decreases
I _1 )' "2:_" _:"3: "4" "5"°_; / I'tL /'_" /=_7I I
I
Pitch display
if the knob is released, the pitch will stop changing, and after
approximately 2 seconds the pitch display will change back to
the time display.
Pitch changing steps
The +5.9% position is a half tone sharp ( _ ).
The -5.6% position is a half tone flat ( _ ).
The pitch can be adjusted by turning the knob even if the pitch con-
trol indicator is switched off. The playback sound will not change if
this is done. To play back at the setting pitch, press OFF/ON to
make the pitch control indicator illuminate.
Fine adjustment is possible by turning the knob and then im-
mediately turning it back to the original position. In this case, the
pitch will change by 0.1% only.
While changing the pitch, the time display will show the playback
position only. This will not match the actual playback time.
26
To play in the 0% standard pitch
Press OFFION to switch off the pitch control in-
dicator.
OFF/ON
%
Even after the pitch control indicator has been switched off, the
pitch setting will remain in memory as long as the power of the
changer is not turned off.