Filter
Top Products
Precautions
Before using this unit please read these operating instructions
carefully. Take special care to follow the warnings indicated on the
unit itselfas well as the safely suggestions listed below.
Afterwards keep them handy for future reference.
Safety
2.
Power Source -- The unit should be connected to power supply
only of the type described in the operating instructions or as
marked onthe unit.
Polarization -- If the unit is equipped with a polarized AC power
plug (a plug havingone blade wider than the other), that plug will
fit into the AC outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
3. Power Cord Protection -- AC power supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them. Never take holdof the plug or
cord if your hand is wet, and always grasp the plug body when
connecting or disconnecting it.
4. Nonuse Periods -- When the unit is not used, turn the power off.
When left unused for a long period of time, the unit should be
unplugged from the household AC outlet.
Installation
Environment
1. Water and Moisture -- Do not use this unit near water--for
example, near a bathtub, washbowl, swimming pool, or the like.
Damp basements should also be avoided.
2. Condensation -- Moisture may form on the lens in the following
cases...
==immediately after a heater has been turned on.
ein a steamy or very humid room.
ewhen the unit is suddenly moved from a cold environment to a
warm one.
Placement
1. Ventilation -- The unit should be situated so that its location or
position does not interfere with itsproper ventilation. Allow 10 cm
(4") clearance from the rear of the unit.
2. Foreign Material -- Care should be taken so that objects do not
fall into and liquids are not spilled into the unit. Do not subject this
unitto excessive smoke, dust, mechanical vibration, or shock.
3. Magnetism -- The unit should be situated away from equipment
ordevices that generate strong magnetism.
4. Stacking -- Do not place heavy objects, other than system
components, on top of the unit.
If moisture forms inside this unit, it may not operate properly. To
correct this problem, turn on the power and wait about one hour
for the moisture to evaporate.
3. Heat -- The unit should be situated away from heat sources such
as radiators and the like. It also should not be placed in
temperatures lessthan 5°C (41°F) or greater than 35°C (95°F).
5. Surface -- Place the unit on a flat, level surface.
6. Carts and Stands -- The unit should be used only with a cart or
stand that is recommended by the manufacturer. The unit and
cart combination should be moved with care.
Quick stops, excessive force, and uneven
surfaces may cause the unit and cart combi-
nation to overturn.
7. Wall or Ceiling Mounting -- The unit should not be mounted to a
wall orceiling, unless specified in this operating instructions.
Maintenance
Clean the cabinet, panel and controls with a soft cloth lightly
moistened with mild detergent solution.
Do not use any type of abrasive pad, scouring powder or solvent
such as alcohol or benzine.
Service
1. Damage Requiring Service -- The unit should be serviced by
qualified service personnel when:
(a) The AC power supply cord or the plughas been damaged; or
(b) Objects have fallen or liquid has been spilled intothe unit; or
(c) The unit has been exposed torain; or
(d) The unit does not appear to operate normally or exhibits a
marked change in performance; or
(e) The unit has been dropped, or the enclosure damaged.
2. Servicing -- The user should not attempt to service the unit
beyond that described in the operating instructions. All other
servicing should he referred to qualified service personnel.
CAUTION:
• This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian Department
of Communications.
• THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
3