Filter
Top Products
7
DIGITAL IN terminals
Used for the input of digital audio signals. Connect these digital input terminals to the
appropriate digital output terminals of the digital audio source unit such as a DVD or CD player.
Use a good quality RCA coaxial cable or optical digital cable.
< When inserting the plug of the optical cable, the protective shutter of the terminal will open and
you should hear it click into position when fully inserted. Be careful that you do not force the
plug, because this could result in damage to the protective shutter, the cable, or the unit itself.
AUDIO IN/OUT jacks
Analog 2-channel audio signal is input or output from these jacks. Connect the component with
commercially available RCA cables.
Make sure to connect:
white plug
q white jack (L: left channel)
red plug
q red jack (R: right channel)
EXTERNAL IN jacks
If your DVD player or decoder has 6-channel analog audio outputs, connect them with good
quality RCA cables.
VIDEO jack
Connect the component with a high quality RCA cable designed for video applications.
AC OUTLET (switched)
Not available for Australian model.
This outlet is active only when the unit is on.
Caution:
Make sure that the total power consumption of all equipment connected to the outlet does not
exceed 100 watts or 500 mA.
AC Power Cord
After all other connections are complete, connect the plug to the AC wall socket.
Be sure to connect the power cord to an AC outlet which supplies the correct voltage.
Hold the power plug when plugging or unplugging the power cord. Never pull or yank on the
power cord.
F
E
D
C
B
A