Filter
Top Products
20
Surround Mode
Each time the AUTO/MANUAL button is pressed, the
decoding mode is changed as follows:
AUTO (default):
The appropriate decoding mode is selected automatically.
Usually, select this.
MANUAL:
Select the desired surround mode by pressing the
SURROUND button ( or ).
Each time the SURROUND button ( or ) is pressed,
the surround mode changes.
When Dolby Digital signals are input and AUTO is selected,
the surround mode is set to DOLBY DIGITAL automatically. If
you press the SURROUND button ( or ), you can select
one of the following surround modes:
When the source is Dolby Digital 5.1-channel:
DOLBY DIGITAL
When the source is Dolby Digital 2-channel:
DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC II MUSIC,
DOLBY PRO LOGIC
When DTS signals are input and AUTO is selected, the
surround mode is set to DTS automatically. The SURROUND
buttons do not work.
When the source is PCM (2-channel stereo), or when analog
stereo signals are input, you can select one of the following
surround modes:
DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC II MUSIC,
DOLBY PRO LOGIC, MATRIX, CHURCH, THEATER, HALL,
STADIUM
< When the SURROUND button ( or ) is pressed once, the
current surround mode is displayed. Press the SURROUND
button ( or ) repeatedly to select any other surround
mode.
< When you press the SURROUND button ( or ), the
sound is cut off for a moment.
< DOLBY DIGITAL can be selected only during playback of a
DVD disc recorded in DOLBY DIGITAL format.
< Press the STEREO button to cancel the surround mode.
< If the SPEAKER ON/OFF button is turned to OFF, the
SURROUND buttons will not work.
C
B
A
< When EXTERNAL IN is selected, the SURROUND buttons ( /
) and the AUTO/MANUAL button do not work.
If a digital device is connected to DIGITAL IN terminals,
select the desired decoding mode by pressing the
AUTO/MANUAL button.