Filter
Top Products
displays current status.
illuminates when RDS function is active (European models
only).
illuminates when FM stereo broadcast is tuned.
illuminates when a station is tuned.
illuminates when sleep timer is set.
illuminates when preset tuning mode is selected.
blinks when the MEMORY/ENTER button is pressed.
displays preset number, sleep time or delay time.
illuminates when tone control is set to off.
illuminates when a digital input is selected and blinks when
no signal is present in the selected digital input.
surround mode
k
j
i
h
g
f
e
d
c
b
a
Front Panel Display
b
a c
d
e
f
g
i
k
h
j
15
Remote Control Unit
The provided Remote Control Unit allows the unit to be operated
from a distance.
When operating the remote control unit, point it towards the
remote sensor on the front panel of the unit.
< Even if the remote control unit is operated within the effective
range (7 m), remote control operation may be impossible if
there are any obstacles between the unit and the remote
control.
< If the remote control unit is operated near other products
which generate infrared rays, or if other remote control
devices using infrared rays are used near the unit, it may
operate incorrectly. Conversely, the other products may
operate incorrectly.
Battery Installation
1. Remove the battery compartment cover.
2. Insert two “AAA” (R03 or UM-4) dry batteries. Make sure
that the batteries are inserted with their positive “
+” and
negative “
_” poles positioned correctly.
3. Close the cover.
Battery Replacement
If the distance required between the remote control unit and
main unit decreases, the batteries are exhausted. In this case
replace the batteries with new ones.
Precautions concerning batteries
< Be sure to insert the batteries with correct positive “+” and
negative “
_” polarities.
< Use batteries of the same type. Never use different types of
batteries together.
< Rechargeable and non-rechargeable batteries can be used.
Refer to the precautions on their labels.
< When the remote control unit is not to be used for a long
time (more than a month), remove the batteries from the
remote control unit to prevent them from leaking. If they
leak, wipe away the liquid inside the battery compartment
and replace the batteries with new ones.
< Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.