Filter
Top Products
19
Recording a Source
Dubbing from VIDEO 2 or 3 to VIDEO 1
Select VIDEO 2 or 3 by pressing the VIDEO button (or
the VIDEO 2 or 3 button of the remote control unit).
1
Start recording on the VCR connected to VIDEO 1 REC
jacks.
Start playback of the video and audio source to be
recorded.
The picture from the video component appears on the TV,
and the sound from the audio component is output from the
speakers.
4
3
Start recording on the cassette tape deck connected to
TAPE REC jacks.
< The volume and tone control have no effect on the recording
signals.
< The analog signals input from the EXTERNAL IN jacks cannot
be recorded.
2
Dubbing the audio and video signals
separately
While dubbing the video signal of VIDEO 2 or 3, you can replace
the sound from VCR with the sound from an audio source such
as CD.
Select the video source to be recorded using the VIDEO
button (or the VIDEO 2 or 3 button of the remote
control unit).
1
Select the audio source to be recorded (CD, TUNER or
AUX) using the AUDIO button (or the corresponding
buttons of the remote control unit).
2
Start recording on the VCR connected to VIDEO 1 REC
jacks.
Start playback on the VCR connected to VIDEO 2 or 3
INPUT jacks.
The audio and video signals input from VIDEO 2 or 3 are
output from VIDEO 1 REC jacks.
< Copy protected DVD discs cannot be dubbed.
3
2
Recording a Source
Select a source to be recorded by pressing one of the
INPUT SELECTOR buttons.
1