Filter
Top Products
28
Setup
The setup menu appears on the front panel’s display and allows
you to perform the setup procedures easily. In most situations,
you will only need to set this once during the installation and
layout of your home theater, and it rarely needs to be changed
later.
The setup menu consists of 5 main menus; SYSTEM, INPUT, SPK
SET, CH LEVEL and PARAMTR. These menus are then divided up
into various sub-menus.
Turn on the main unit during standby.
1
Press the ENTER button to confirm the entry.
4
Press the SETUP button to enter the setup menu.
2
“SYSTEM” appears on the front panel display.
< To exit the setup menu, press the SETUP button again.
Use the SELECT buttons (5/b/g/t) to navigate the
menus.
3
< When a numerical value (such as speaker distance) is
changed, the value is confirmed without pressing the ENTER
button.
< Individual menu functions are described on pages 30-33.
< Repeat steps and as required.
Exit the setup menu by pressing the SETUP button once
more.
5
43
< Refer to the Setup Menu Chart on the next page.