Filter
Top Products
23
DOLBY PRO LOGIC II parameters
DIMENPANO C.WIDTH
PANO (panorama):
This mode extends the front stereo image to include the
surround speakers for an exciting wraparound effect with
side wall imaging. Select “ON” or “OFF”.
The default setting is “OFF”.
C.WIDTH (center width):
This adjusts the center image so it may be heard only from
the center speaker, only from the left/right speakers as a
phantom image, or from all three front speakers to varying
degrees.
The adjustable range is from 0 to 7. The default setting is
“3”.
DIMEN (dimension):
This adjusts the sound-field either towards the front or
towards the rear. The adjustable range is from –3 to +3. The
default setting is “0”.
Repeat step and to adjust other parameters.
When all the configurations have been finished, leave the unit
idle for 5 seconds to exit.
32
You can adjust the parameters for DOLBY PRO LOGIC II MUSIC.
Select DOLBY PRO LOGIC II MUSIC by pressing the
SURROUND MODE button ( or ).
1
Press the SURROUND PARAMETER button to change the
parameter.
2
Each time the SELECT button (5 or b) is pressed, the
parameter is changed as follows:
Within 5 seconds, press the SELECT button (g or t) to
change the value.
3