Filter
Top Products
11
Positioning of the Speakers
The positioning of speakers differs according to the size and
acoustics of the listening room. While actually listening to a
program source, try various speaker positions to determine
which layout provides the best surround effect.
< Ideally, position all the speakers in a circle, with the same
distance from your listening position.
< Place the speakers connected to “L” to your left, and “R” to
your right.
Front speakers
Use magnetically shielded speakers, if you are using them
near your TV.
Place the front speakers in front of the listening position, to
the left and right of a TV.
Front speakers are required for all surround modes.
Center speaker
Use a magnetically shielded speaker if you are using it near
your TV. Place a center speaker between the front speakers,
on or below the TV. This speaker stabilizes the sound image.
Rear (Surround) Left and Right speakers
Install these speakers above the level of the listener’s ears,
directly to the left and right (or slightly behind) of your
listening position.
Subwoofer
Reproduces powerful and deep bass sounds.
Use a subwoofer with built-in amplifier referred to as a
“powered subwoofer”. Subwoofers are most effective when
placed on or near the floor and in a corner of the room. Refer
to the instructions that came with your subwoofer for
placement suggestions.
CENTER
FRONT
(LEFT)
REAR
(LEFT)
REAR
(RIGHT)
FRONT
(RIGHT)
SUBWOOFER
Restoring factory settings
If you have made a lot of changes in the setup, and want to
restart from a known set of options, restore the unit to the
factory default settings as follows:
1. Turn the unit standby using the STANDBY/ON button.
2. While holding down the MEMORY/ENTER button, press the
STANDBY/ON button of the main unit.
All memories are erased, and the unit returns to the factory
settings.