Filter
Top Products
32
Settings (Channel Level)
Adjusting channel levels
Press the SELECT button (5 or b) to select the desired
channel, then press the SELECT button (
g or t) to adjust the
selected channel. Repeat these steps to adjust each channel
level.
< The LFE (Low Frequency Effects) level can be adjusted within
the range of –10 to 0 dB and other channel levels within the
range of –15 to +15 dB.
< In general, we recommend the LFE level to be adjusted to 0
dB. (However, the recommended LFE level for some early DTS
software is –10 dB.) If the recommended levels seem too
high, lower setting as necessary.
< These adjusted levels are memorized into user’s memory
(“CAL”), not into the preset memory (“REF 1”, “REF 2”).
Memorizing channel levels
You can memorize the adjusted channel levels into preset
memory (“REF 1”, “REF 2”) and recall the memorized levels
whenever you want. After performing the steps in “Adjusting
channel levels”, press the ENTER button. Press the SELECT
button (
g or t) to select the desired preset memory.
Recalling memorized channel levels
Press the SELECT button (5 or b) to select “MODE”, then
press the SELECT button (
g or t) to select “REF 1” or “REF
2”. The channel levels memorized into the selected preset
memory are recalled.
NIGHT Mode
Press the SELECT button (5 or b) to select “NIGHT M”, then
press the ENTER button. Adjust the dynamic range
compression between 0.0 and 1.0.
This function compresses the dynamic range of previously
specified parts of Dolby Digital or DTS sound track (with
extremely high volume) to minimize the difference in volume
between the specified and non-specified parts.
This makes it easy to hear all of the sound track when
watching movies at night at low levels.
< The night mode setting is valid only when the digital signals
from Dolby Digital or DTS program sources are being input.
< The night mode setting may not be valid in some Dolby
Digital or DTS program sources.
< Refer to “Dynamic Range Compression” on page 22.
PLII MUSIC (DOLBY PRO LOGIC II MUSIC)
Mode
You can adjust the various surround parameters for optimum
surround effect.
< The parameter settings are valid only when listening in DOLBY
PRO LOGIC II MUSIC mode.
< For details, refer to “DOLBY PRO LOGIC II parameters” on
page 23.
Settings (Parameters)