1- Introduction
26 TASCAM CC-222SL
5 – Recording CDs
Rec mute function
The rec mute function allows instant cut-off of the input
signal, and records four seconds of silence on the disc.
1 Whilerecordingisinprogress,presstheREC
MUTEkey.
2 Afteraboutfourseconds,theunitentersrecord
standbymode.
NOTE
This function is only available from the remote control
unit. It is not possible to use this function with the main
unit only.
Copy-protection
The CC-222SL allows copy-protection to be applied to the
discs produced. Naturally, the copy-protection applies only
to digital-to-digital copies.
There are three settings:
FREE (may be freely copied), where no copy-pro-
tection is applied to the recorded disc.
1GEN (single-generation copying), where one digital
copy (“child”) can be made from the recorded disc, but
no digital copies (“grandchildren”) can be made from
the child.
PROH (copy prohibited) which prevents any digital
copies being made from the recorded disc
1 Pressthe
MENU
keyrepeatedlyuntilthedis-play
showsCOPYID>XXXX,whereXXXXisthecurrent
settingforcopy-protectionasshownabove.
•
•
•
2 Turnthe
MULTI DIAL
orusethe
SKIP
keysto
changethecopy-protectionsetting.
NOTE
Copy-protection applies on a “per-track”, not a per-disc
basis. This means that you can apply different copy-
protection levels to different tracks (but you can’t apply
different copy-protection levels to different parts of
the same track). If copy-protection is important to your
work, you may want to check this setting every time you
make a recording, to ensure that you have the protec-
tion level that you want.
Fade-in and fade-out
To provide smooth beginnings and endings to recorded
tracks, the unit provides fade facilities.
Fade-ins are from –∞ (silence) to the set input level (see
“Signal volume” on page 20) and fade-outs go from the
current input volume to silence.
The fade-in and fade-out times can be set indepen-dently
in increments of one second, from 1 second to 24 seconds.
To set the fade times:
1 PresstheMENUkeyrepeatedlyuntilthedisplay
showsFADEIN>XXs,whereXXisthecurrent
fade-intime,inseconds.
2 TurntheMULTI DIALorusetheSKIPkeystochange
thevalueofthefade-intime.
3 PresstheMENUkeyagainsothatthedisplayshows
FADEOUT>XXs,whereXXisthecurrentfade-out
time,inseconds.
4 TurntheMULTI DIALorusetheSKIPkeystochange
thevalueofthefade-outtime.
Itispossibletosetthefade-intimeonlyorthefade-
outtimeonly.
To perform a fade-in:
1 Witharecordablediscloaded,presstheRECORD
keytoenterrecordstandbymode.
ª
ª
2 Startthesourcematerial,andpresstheFADERkey
ontheremotecontrol.
ThedisplayshowsFADEINforthetimespecied
inthemenuitemabove.
Asthefadeprogresses,themonitoredsignalgradually
becomeslouder,reectingthelevelrecordedondisc.
To perform a fade-out:
1 Whilerecording,presstheFADERkey.Thedisplay
showsFADEOUTforthetimespeciedinthe
menuabove.
Asthefadeprogresses,themonitoredsignalgradu-
allybecomesquieter,reectingthelevelrecorded
ondisc.
2 Whentheendofthefade-outtimeisreached,the
unitgoesintorecordstandbymode.Recordingcan
berestartedwiththeFADERkeyorthePLAYor
PAUSEkeys.
The FADER key can be used and also the fade-in and fade-
out times can be reset to new values while recording is in
progress.
ª