Filter
Top Products
1- Introduction
TASCAM CC-222SL 13
2 – Features of the CC-222SL
Display
*
()
Q W E
R
YU
I
O
P
A
SD F
G
H J
K
L:ZX
T
This display shows various types of operation information,
including CD disc information, deck operation modes, and
menu status.
( Tape PLAY Lights when a tape is being played back or
recording.
) ˙/¥ (Tape-running indicator) Shows the direction of a
tape during playback or recording.
Q Tape PAUSE (π) Lights when the unit is in standby
mode for tape playback or recording.
WTape REC Lights during tape recording or recording
standby mode.
E Tape Counter display The tape counter value is incre-
mented when the tape is moving from left to right, and
decremented when it moves from right to left (See “Tape
counter” on page 32 for more details).
R Tape Level meter Displays the playback level and the
input level of the source device for recording operation.
T TAPE, CD In the CD-TAPE CONT PLAY mode (con-
tinuous CD/tape playback), on of these will flash during
playback.
Y INPUT 2 This is always displayed except when record-
ing with the PHONO key.
U LINE 2, DISC display Shows the different sources
available for INPUT 2 (Tape deck).
liNe 2: a signal source is connected to LINE INPUT 2.
Disc: a signal source is connected to internal CD drive.
I DUB 1, 2 When dubbing a tape to a CD-RW, the indica-
tor “Dub 1” lights up. When dubbing a CD-RW to a tape,
indicator “Dub 2” lights up.
O Counter display Either TOTAl or ReMAiN is lit. When
both indictors are off, the time mode is set to show the
elapsed time of the current track.
PDisc information display NO TOC Lights when a disc
does not contain TOC (Table of Contents) data. CD,
CD-R or CD-RW lights up when a disc with TOC data
is loaded.
ACD PLAY (¥) Lights during disc playback.
S CD PAUSE (π) Lights during playback or recording
standby mode.
D CD REC Lights during disc recording or recording
standby mode.
FSYNC Lights when the SYNC recording mode is on.
G REPEAT, A-B display When the Repeat function is
on, “RePeAT” is lit. When the A-B Repeat function is
on, “RePeAT” and “A-b” are lit. “A-b” also blinks until a
“B-point” is entered.
H SINGLE, RANDOM, PROGRAM display Depending
on the playback mode selected. When all the indicators
are off, Continuous playback mode is on.
J Character display Disc or track information, menu,
message, time, and operation status are displayed.
K CD Level meter Displays the playback or input source
level when recording.
L MUSIC CALENDER Available tracks for playback light
up; played back tracks disappear from the screen. When
there are more than 20 tracks available for playback, the
“OVeR” indicator lights up.
: A·SPACE Lights when the Auto Space function is on.
Z A·TRACK Lights when the Auto Track function is on.
The indicator blinks when Time mode is selected.
X INPUT 1 This is always displayed except when record-
ing with the PHONO key.
COPTICAL, COAXIAL, LINE 1, PHONO, TAPE display
Shows the different sources available for INPUT 1 (CD
drive).
OPTicAl: Input source is connected to OPTICAL.
cOAXiAl: Input source is connected to COAXIAL.
liNe 1: Input source is connected to LINE 1.
PhONO: Input source is connected to PHONO.
TAPe: Input source is connected to internal tape deck.