Filter
Top Products
1- Introduction
TASCAM CC-222SL 11
Front panel
123 4 5 6 7 8 9
0
i d
z !
/
.
,
m
n
b
v
c
x
;
lkj
h
g
f
s
a
po
u
yt
r
e
wq
This section provides a brief reminder of the functions
provided by these controls.
1 Power switch (POWER) Turns the unit on and off.
2 Cassette holder Open this holder using the EJECT
key. Insert cassettes tape side downwards, and close the
holder by hand.
3 REW key Rewinds the tape moving fast in the right-to-
left direction. If the tape is already in playback mode, it
acts as a search key.
4 FFWD key Forwards the tape moving fast in the left-to-
right direction. If the tape is already in playback mode,
it acts as a search key.
5 Tape STOP key Stops the current tape transport operation.
6 Tape PLAY key (˙) Starts or resumes tape playback or
recording, from right to left.
7 Tape PLAY key (¥) Starts or resumes tape playback or
recording, from left to right.
8 Tape PAUSE key Stands by for tape playback or record-
ing. Pressing this key again resumes the operation.
9 Tape RECORD key When stopped, pressing this key
enters recording standby mode.
0 Tape EJECT key Opens the cassette holder.
q Display Provides information on the status of the cas-
sette and disc transport and the selected input sources, etc.
w RESET key Resets the tape counter to zero.
e RTZ key Returns the tape to the zero position.
r INPUT 2 SEL key Repeated presses of this key cycles
between the different sources available for the cassette
recorder: LINE2 and DISC.
t DUB 1 TAPE>CD-RW key Starts the process of auto-
matic recording from the cassette to a recordable disc.
y INPUT 1 SEL key Repeated presses of this key cycles
through the different sources available for the CD drive:
OPTICAL, COAXIAL, LINE 1, PHONO, and TAPE.
u PHONO key Starts recording from the phono source to
the cassette or disc recorder, depending on the selection
made in the menu system. See the appropriate sections
on recording to either tape or disc.
i REC MUTE key When recording to cassette and this
key is pressed, the sound is muted for about four sec-
onds, and then the unit enters record standby mode.
o INPUT (cassette) control This rotary control affects
the level fed to the cassette. Note that it has no effect
during automatic disc-to-tape dubbing if the menu item
bypassing the volume during dubbing is set to “through”.
p DUB 2 TAPE<CD-RW key Starts the process of auto-
matic recording from the disc to a cassette.
a INPUT (CD) control This rotary control affects the
level fed to the disc. Note that it has no effect during
automatic tape-to-disc dubbing if the menu item bypass-
ing the volume during dubbing is set to “through”.
s Disc EJECT key Ejects the loaded disc.
d DISPLAY key Changes the time display for the disc
recording and playback.
f FINALIZE key Used when finalizing recordable discs.
g ERASE key Used when erasing data from CD-RW
discs.
h SYNC REC key Turns synchronized recording of the
disc recorder on and off.
j MENU key Repeated presses of this key cycles through
the different menu options.
2 – Features of the CC-222SL