Filter
Top Products
CAUTIONCAUTION
58 Tact Audio
Crossover Package M/S-2150 X
Example 3
To summarize:
• All the presets for Amp#1 are set to low-pass filter for both left and right
channel with cutoff frequency (LF-Hz) of 1000 Hz and filter order (LO)
going from LO=10 for preset 1 (CRO –1) to LO=1 for preset 9 (CRO-9).
• All the presets for Amp#2 are set to high-pass filter for both left and right
channel with cutoff frequency (HF-Hz) of 1000 Hz and filter order (HO)
going from HO=10 for preset 1 (CRO –1) to HO=1 for preset 9 (CRO-9).
After all setups are configured Amp#1 and Amp#2 will produce left and right output
with the frequency response as shown in Fig 9. Note that these curve represent
real measurements and they are not result of computer simulation.