Filter
Top Products
CAUTIONCAUTION
34 Tact Audio
The M/S-2150 X is more than just an amplifier. With powerful features such as level
balancing, time alignment, and assignable electronic crossovers, you can custom-
ize and build the amplifier system that you need, whether your system is biamped,
triamped or more. When in CRO mode M/S-2150 X does not require computer
interface. However, when in RCS mode M/S-2150 X requires computer interface via
RS232 communication port.
Each of Tact’s amplifiers employ an RS232 in and out connection for control from
any RS232 based controller. Complete instructions for using the M/S-2150-X
software can be found in the online help available in the software.
Your computer system must meet the following minimum requirements:
- An IBM compatible PC with Pentium 1000 MHz, 512 MB Ram & 100 MB
free hard disk space or better
- Microsoft Windows 2000 or XP
- Operating system regional setting must be set to “English (United
States)”
- Microsoft Windows-compatible graphics-card and monitor with screen
resolution 800x600 or better
- CD-ROM drive
- Microsoft windows compatible 2- or 3- button mouse
- Standard RS-232 serial port with DB-9 connectors or USB RS232 adapter
System requirements
Tact M/S-2150 X Software
Software Installation
Follow the steps below to install the M/S-2150 X Software:
1 - Start windows and insert the TacT software CD into your CD-ROM drive.
2 - Double-click on the My Computer icon on the desktop.
3 - Double-click on the CD icon to launch the CD browser.
4 - Double-click on “Tact-2150 X vx.x.exe” and follow the instructions.
Start The M/S-2150 X
software
To start the software go to the Windows Start menu, select Programs then Tact-
2150 X and click on the Tact-2150 X icon. You should now see the M/S-2150 X
main screen.
Software
M/S-2150 X