Filter
Top Products
CAUTIONCAUTION
50 Tact Audio
CRO preset 2 (CRO- 2) for both amplifier is the same as preset 1 except that
in preset 2 filter order for both Left and Right channel is set to 9. CRO preset
2 is shown in figure below.
L: LO HO FL-Hz FH-Hz
HP -- 9 ----- 100
R: LO HO FL-Hz FH-Hz
HP -- 9 ----- 100
L: LO HO FL-Hz FH-Hz
LP 9 -- 100 -----
R: LO HO FL-Hz FH-Hz
LP 9 -- 100 -----
L: LO HO FL-Hz FH-Hz
HP -- 2 ----- 100
R: LO HO FL-Hz FH-Hz
HP -- 2 ----- 100
L: LO HO FL-Hz FH-Hz
LP 2 -- 100 -----
R: LO HO FL-Hz FH-Hz
LP 2 -- 100 -----
Repeat the same settings for the remaining presets with decreasing filter
order. CRO preset 10 should look like
To summarize:
• All the presets for Amp#1 are set to high-pass filter for both left and
right channel with cutoff frequency (HF-Hz) of 100 Hz and filter order
(HO) going from HO=10 for preset 1 (CRO –1) to HO=2 for preset 9
(CRO-9).
• All the presets for Amp#2 are set to low-pass filter for both left and
right channel with cutoff frequency (HF-Hz) of 100 Hz and filter order
(HO) going from LO=10 for preset 1 (CRO –1) to LO=2 for preset 9
(CRO-9).
Left channel Amp#1 EDIT menu
Left channel Amp#2 EDIT menu
Right channel Amp#1 EDIT menu
Right channel Amp#2 EDIT menu
Left channel Amp#1 EDIT menu
Right channel Amp#1 EDIT menu
Left channel Amp#2 EDIT menu Right channel Amp#2 EDIT menu
Example 1
Crossover Package M/S-2150 X