Filter
Top Products
CAUTIONCAUTION
32 Tact Audio
ADC menu
(ADC module optional)
1 - Assignable gain values.
2 - Input channel currently selected.
3 - Active gain setting for selected input channel.
ADC Menu
The M/S-2150 X may be equipped with an optional state of the are Analog to Digital
Converter. To further enhance the converter’s performance, the system offers two
selectable gain values for the ADC input stage. These two values may be assigned
to each input independently.
To select an analog Input (2) use the ANALOG selector button found on the M/S-
2150 front panel or on the remote control to scroll to the input you would like to
edit. Use LEFT and RIGHT buttons to highlight desired option and then press EN-
TER to select it.
1
GAIN IN 2: HIGH
LOW HIGH
3
1 - Lock code.
2 - Active lock state.
3 - Set button.
Lock Menu
1
M/S 2150 : LOCKED
PASSWORD : 0000 SET
2
LOCK menu
3
The lock menu allows a lock to be set to prevent entering the M/S-2150 editing
menus without unlocking the M/S-2150 X with the lock code. By default the M/S-
2150 X is unlocked and all menus can be accessed and inputs can be changed
without entering a lock code. When the unit is locked, the only menu option that
can be entered is the LOCK menu to unlock the unit. Once the lock code is en-
tered you will be able to use the M/S-2150 X menus until the lock code is entered
again to lock the M/S-2150 X.
To lock or unlock the M/S 2150 X enter the lock code “1-2-3-4” by using the LEFT
and RIGHT remote control buttons to select each digit and use the UP and DOWN
buttons to select the desired number from 0 to 9 . Once the code is entered select
the SET option and then press the ENTER button to unlock or lock the unit. The
active lock state will be displayed in the active lock state portion of the screen.
2
LOW = -6.0dB in reference to 0.0dB. Input sensitivity: 2.2volts
HIGH = 0.0dB in reference to 0.0dB. Input sensitivity: 4.4volts.
13
Main Menu Options
M/S-2150 X