Filter
Top Products
CAUTIONCAUTION
54 Tact Audio
To summarize:
• All presets for Amp#1 are set to low-pass filter for left channel and to
high-pass for right channel. Left channel cutoff frequency (LF-Hz) is
set to 100 Hz and right channel cutoff frequency (HF-Hz) is set to 100
Hz.
• Amp#2 CRO presets are identical to Amp#1 CRO presets.
NOTE: After any parameter CRO parameter in changed you must click on
SEND option to send that parameter to selected amplifier.
NOTE: In this configuration Amp#1 will process left audio channel only.
Amp#1 left output will output low-pass filtered left audio channel and Amp#1
right output will output high-pass filtered left audio channel. Amp#2 will
process right audio channel only. Amp#2 left output will output low-pass
filtered right audio channel and Amp#2 right output will output high-pass
filtered right audio channel.
After all setups are configured Amp#1 and Amp#2 will produce left and right
output with the frequency response as shown in Fig 7. Note that these curve
represent real measurements and they are not result of computer simulation.
Crossover Package M/S-2150 X