Sony Ericsson BDV-E300 Home Theater System User Manual


 
External Audio Device
61
GB
To set the ID of the surround
amplifier
Refer to the operating instructions of the
surround amplifier.
To set the ID of the S-AIR
receiver
Refer to the operating instructions of the S-AIR
receiver.
To use multiple S-AIR main units
You can use multiple S-AIR main units by
setting a different ID for each component.
You can enjoy the system’s sound by using the
S-AIR receiver. The S-AIR receiver can be
placed in another room for enjoying the
system’s sound there.
For details of the S-AIR receiver, refer to the
operating instructions of the S-AIR receiver.
1 Press SYSTEM MENU.
2 Press X/x repeatedly until “S-AIR
MENU” appears in the front panel
display, then press or c.
3 Press X/x repeatedly until “S-AIR
MODE” appears in the front panel
display, then press or c.
Note
• When the wireless transmitter is not inserted in
the unit, “S-AIR MODE” cannot be selected.
4 Press X/x to select the desired setting.
•“PARTY: The S-AIR receiver outputs
sound according to functions set on the
unit.
“SEPARATE”: You can set the desired
function for the S-AIR receiver while unit
functions do not change.
5 Press .
The setting is made.
6 Press SYSTEM MENU.
The system menu turns off.
ID A
S-AIR main unit
(This unit)
ID A
S-AIR sub unit
ID A
S-AIR sub unit
Other S-AIR
main unit
S-AIR main unit
(This unit)
ID A
S-AIR sub unit
ID A
S-AIR
sub unit
ID B
S-AIR sub unit
ID A
ID B
Enjoying the system’s sound in
another room
For the S-AIR receiver