Filter
Top Products
68
Appendix: Manual Network Configuration
iii. Enter the Gateway IP address for the
network.
iv. Enter the Primary DNS IP address for
the network.
v. Enter the Secondary DNS IP address
for the network, or leave blank if there
is none.
h. Enter your wireless network name (SSID). Note that the SSID is case
sensitive. Turn the TUNE knob to scroll through the list of characters
and highlight each character. Press the
TUNE knob to select the highlighted
character and move to the next character.
If you make a mistake, turn the TUNE knob
to highlight BKSP and press the TUNE
knob to erase the character. When done,
turn the TUNE knob to highlight OK and
press the TUNE knob.
i. Select the authentication type, Open (no
key (password)), Pre-Shared key, WPA, or
WPA2. Turn the TUNE Knob to highlight your
selection and press the TUNE knob. If you
have selected Open, skip ahead to step k.
j. Depending upon your selection, complete these additional steps:
•Pre-Shared Key:
i. Select whether the Pre-Shared Key has WEP encryption disabled or
SSID
BKSP
OK
CANCEL
0123456789., ab
cdefghijklmnopq
rstuvwxyzABCDEF
GHIJKLMNOPQRSTU
Open
Pre-Shared Key
WPA
WPA2
>
Authentication
IP settings
IP address
.
0
.
0
.
0
Subnet mask
.
255 255
.
255
.
0
0