Filter
Top Products
21
To connect to a wired network using the Network Wizard:
a.
At the rear of the Radio, remove the compartment cover and
connect an Ethernet cable to the Ethernet connector on the inside
left of the compartment. Refer to “Wired Ethernet Connector”
on page 11 for the location of the Ethernet connector. Replace the
compartment cover.
b. Connect the other end of the Ethernet cable to your home’s wired
network.
c. If you have turned your SIRIUS|XM TTR1 Radio on for the first time,
the SSID screen will already be displayed. Skip ahead to step g.
d. Press MENU and turn the TUNE knob to highlight System Setup.
Press the TUNE Knob.
e. Turn the TUNE knob to highlight
Network. Press the TUNE Knob.
f. Press the TUNE Knob to select
Network Wizard.
g. The Radio will scan for networks.
When the scan is complete, turn the
TUNE knob to highlight [Wired] and
press the TUNE knob.
h. If the Radio is able to connect to your
network, the Connected screen will
be displayed. If Waiting for Ethernet
Connected
Connected
[Wired]
Some_Network_Name
Other_Network_Name
[Rescan]
[Manual config]
SSID