Filter
Top Products
50
US
• The receiver is unable to read data in NTFS
format.
• The receiver is unable to read data other than
that saved in the first partition of a hard disk
drive.
• Operation of models not listed here is not
guaranteed.
• Operation may not always be ensured even
when using these USB devices.
• Some of these USB devices may not be
available for purchase in certain areas.
• When formatting the above models, be sure to
format using the model itself or the dedicated
formatting software for that model.
• When connecting a USB device to the receiver,
be sure to connect after the display “Creating
Library” or “Creating Database” on the USB
device has disappeared.
1 Select “Listen” from the home
menu, then press .
2 Select “USB”, then press .
When the USB device is connected,
“USB” appears on the TV screen.
You can operate the USB device using
the remote control of the receiver.
3 Select the content you want from
the content list, then press .
The selected content starts playback
and the information of music contents
appears on the TV screen.
To operate the USB device
using the remote control
Press USB before you use the following
buttons.
Notes on the USB device
• Do not remove the USB device during
operation. To avoid data corruption or
damage to the USB device, turn the
receiver off when connecting or
removing the USB device.
• When USB cable connection is
necessary, connect the USB cable
supplied with the USB device to be
connected. Refer to the operating
instructions supplied with the USB
device to be connected for details on the
operation method.
Notes
Operating the USB
device
V/v/B/b,
Press Operation
N Starts play.
X Pauses play.
x Stops play.
./> Goes to the previous/next
file.
REPEAT Enters repeat mode.
SHUFFLE Enters shuffle mode.
N
./>
x
X
USB
SHUFFLE
REPEAT