Filter
Top Products
43
US
Preparing the Receiver
5 Perform the server settings.
To listen to audio content stored on the
server, you need to set up your server
(page 61).
• When checking the network settings, see
“Information” (page 101).
• For details on entering the PIN code into the
wireless LAN router/access point, refer to the
operating instructions of the wireless LAN
router/access point.
1 Select “Wired” in step 5 in
“Searching for an access point and
setting up a wireless network
(Access Point Scan method)”
(page 40).
“How to acquire the IP Address”
appears on the TV screen.
2 Press V/v repeatedly to select
“Auto”, then press .
When using a fixed IP address
Select “Manual”, then press . The
IP address input display appears on the
TV screen.
Enter the value for “IP Address” using
the on-screen keyboard. Press V/v/B/
b and to select the character one by
one. Then, select “Enter” and press
to confirm the value.
Enter the value for “Subnet Mask”,
“Default Gateway”, “Primary DNS”
and “Secondary DNS”. Then, select
“Next” and press .
3 Press V/v repeatedly to select
“Ok”, then press .
“Connecting to the network. Please
wait.” appears on the TV screen.
“Network Settings are now complete
and the receiver has been successfully
connected to the network.” appears
after the network settings are
completed. To return to the Network
Settings menu, press . (Depending
on the network environment, the
network settings may take some time.)
4 Perform the server settings.
To listen to audio content stored on the
server, you need to set up your server
(page 61).
When checking the network settings, see
“Information” (page 101).
Guide to on-screen
display operation
You can display the menu of the receiver
on the TV screen and select the function
you want to use on the TV screen by
pressing V/v/B/b and on the remote
control.
When you start operating the receiver,
make sure to press AMP on the remote
control first. Otherwise, operations that
follow may not be aimed at the receiver.
The AMP button on the remote control lights up
when you press HOME.
Tips
Using a wired LAN
connection
Tip
Tip