Filter
Top Products
77
GB
Enjoying Surround Sound
Notes
•This function does not work in following cases.
– MULTI IN is selected.
– Input signals of which the sampling frequency is
more than 96 kHz are being received.
•If you set the NIGHT MODE to on during DTS 96/
24 signal reception, it will play back only at 48
kHz.
Tip
While this function is on, the BASS, TREBLE, and
EFFECT levels increase, and “D.RANGE COMP.”
is automatically set to “MAX” (page 59).
Listening to the sound
without any adjustment
(ANALOG DIRECT)
You can switch the audio of the selected input to 2
channel analog input. This function enables you to
enjoy high quality analog sources.
When using this function, only the volume and front
speaker balance can be adjusted.
Press A.DIRECT.
Analog audio is output. ANALOG DIRECT
function is toggled between on and off as you press
A.DIRECT.
To enjoy the analog sound
source with noise free
performance (Analog pureness
control)
The Analog pureness control function by-
passes the video and digital circuits that are not
in use, and shuts down the power while the
analog source is being played back. Thus, the
Analog pureness control function provides
noise-free audio performance and delivers
high sound quality.
The Analog pureness control function is
activated when you select an input source with
no video input, then select “ANALOG” from
INPUT MODE, and you press ANALOG
DIRECT.
A.DIRECT